xinjia_06Mon - Sat : 8:30AM - 5:30 PM Closed in Sundays
xinjia_10Xiwangzhuang Industrial Zone,Anping County,Hebei,P.R.China.
You are here: Home » News » News » Knitted Wire Mesh

Knitted Wire Mesh

Views: 112     Author: Site Editor     Publish Time: 2017-04-18      Origin: Site

Knitted mesh is made of either crochet or knitting of various wire materials including stainless steel, copper, synthetic fiber and other materials.

Knitted wire mesh products are applied to those applications including cryogenic, high temperature, corrosive atmosphere, heat conductive, high usage, or special service applications.

Our knitted wire mesh is made from all material available in wire shapes for processing of the following parts:

Filters Oil and Air Breather Elements Catalytic Converter Mesh Insulator Blanket Mesh Mufflers and Silencers Copper Mesh Oil-Bath Separators Mist Elimination Pads Ground Wire Mesh

Main Materials Applied for Knitted Mesh: Monel knitted wire mesh has good corrosion resistance in all extreme environments and it is reasonably conductive and is tough with high tensile strength, giving good wear characteristics.

Knitted wire mesh made of tinned copper clad steel has the best shielding performance of all wires used in knitted meshes, combining low contact resistance with a small degree of permeability. It is not suitable for highly abrasive applications where the TIN plating may wear away to expose the copper. The corrosion resistance of tinned copper clad steel knitted wire mesh is suitable for most applications

Aluminum knitted wire mesh is mechanically weak and will readily take a compression set and this combined with its readiness to form a non-conducting oxide

Stainless steel knitted mesh is often used as a protective final layer over the other knitted mesh gasket, materials on order to provide a wear-resistant contact surface

Knitted Wire Mesh


HOT PRODUCTS

ABOUT XINJIA

Xinjia Metal Products Co., Ltd. is located in Anping, the famous Wire Mesh Land of China. Started since 1995, Xinjia Metal Products Co., Ltd. 

CONTACT

Tel: +86-318-7977166 
Fax: +86-318-7977166
Add: Xiwangzhuang Industrial Zone,Anping County,Hebei,P.R.China 053600
Copyright © 2017 Anping Xinjia Metal Products Co.,Ltd. All rights reserved .      冀ICP备17024718号-1         Design by [Rongchuangmedia]