xinjia_06Mon - Sat : 8:30AM - 5:30 PM Closed in Sundays
xinjia_10Xiwangzhuang Industrial Zone,Anping County,Hebei,P.R.China.
You are here: Home » News » News » Car Front Grill Mesh(crimped mesh)

Car Front Grill Mesh(crimped mesh)

Views: 188     Author: Site Editor     Publish Time: 2017-04-25      Origin: Site

The above selection are our most popular Car Grilles there are even more choices on our Crimped Decorative page

Fine Mesh Metals supplies a range of specially crimped mesh in brass and stainless steel Type 304 or 316.

Brass. Often the choice for vintage cars as it can then be chrome finished to match the original grille.
Type 304. This is an austenitic, non magnetic, economical grade of stainless steel which will not rust under normal conditions . It is an 18/8 stainless steel, therefore 18% chromium and 8% nickel.
Type 316. This is similar to type 304 but with the addition of molybdenum. Giving it a significantly higher corrosion resistance.
When cutting grilles to size the maximum number of pieces is 6 per item, please call if you require more, offcuts are not included.

When calculating the size of grille you require please add approx 15mm minimum to your aperture size on all sides to enable fixing behind a recess. Please remember to divide up your grille if spanning a number of openings as this may lower the price.

Car Front Grill Mesh(crimped mesh)

Car Front Grill Mesh(crimped mesh)



Xinjia Metal Products Co., Ltd. is located in Anping, the famous Wire Mesh Land of China. Started since 1995, Xinjia Metal Products Co., Ltd. 


Tel: +86-318-7977166 
Fax: +86-318-7977166
Add: Xiwangzhuang Industrial Zone,Anping County,Hebei,P.R.China 053600
Copyright © 2017 Anping Xinjia Metal Products Co.,Ltd. All rights reserved .      冀ICP备17024718号-1         Design by [Rongchuangmedia]